- 0 Posts
- 33 Comments
FrederikNJS@lemm.eeto
Technology@lemmy.world•YouTube’s Deliberate Indifference Exposes Kids to disgusting ContentEnglish
2·1 year agoIt’s pretty clear that you didn’t actually watch the video… The video has nothing against TADC…
FrederikNJS@lemm.eeto
Technology@lemmy.world•‘Alexa, what do you know about us?’ What I discovered when I asked Amazon to tell me everything my family’s smart speaker had heardEnglish
4·1 year agoEven if all support is dropped, everything is running on open source software, so nothing is going to stop working as a result of dropped support.
Finding replacements might become tricky at some point though.
FrederikNJS@lemm.eeto
Technology@lemmy.world•‘Alexa, what do you know about us?’ What I discovered when I asked Amazon to tell me everything my family’s smart speaker had heardEnglish
6·1 year agoIt doesn’t really matter whether Zigbee was merged into something else, because it simply doesn’t have any technical means of phoning home. It simply can’t access the Internet.
There’s no intermediate corporate owned servers, there’s no proprietary software.
So it doesn’t really matter what the corporation does because it can’t affect my “smart” devices.
FrederikNJS@lemm.eeto
Technology@lemmy.world•‘Alexa, what do you know about us?’ What I discovered when I asked Amazon to tell me everything my family’s smart speaker had heardEnglish
122·1 year agoThat depends on the kind of “smart”.
I have a bunch of IKEA “smart” light bulbs, but they are connected through a Sonoff USB Zigbee dongle. And all of it is controlled through the open-source zigbee2mqtt and home-assistant.
No one, but myself and my family, have any control or ownership of any of those devices.
FrederikNJS@lemm.eeto
Selfhosted@lemmy.world•How can I contribute processing power to the community?English
8·1 year agoThat’s definitely not what I’ve heard, please elaborate.
FrederikNJS@lemm.eeto
Selfhosted@lemmy.world•What are the minimum or recommended requirements for a personal home server?English
2·2 years agoThe only true “roadblock” I have experienced was when running on the raspberry pi, where the CPU was too slow to do any transcoding at all, and the memory was too small and unupgradable to be able to run much at the same time.
As soon as I had migrated to a proper desktop (the i7-920) I could run basically everything I would regularly want. And from then on it was a piece of cake upgrading. Shut the machine down, unplug, swap the parts, plug in, turn on. Linux has happily booted up with no trouble with the new hardware.
Since my first server was a classic bios, and the later machines was UEFI, then that step required a reinstall… But after the reinstall, I actually just copied all the contents of the root partition over, and it just worked.
The main limiting factors for me has been the amount of memory, the amount of SATA connectors for disks, and whether the hardware supported hardware transcoding.
For memory, ensure the motherboard has 4 sockets for memory, that makes it easy to start out with a bit of memory and upgrade later. For example you could start out with 2x 4GB sticks for a total of 8GB, and then later when you feel like you need more, you buy 2x 8GB sticks. Now you have a total of 24 GB.
For SATA ports, ensure the motherboard has enough ports for your needs, and I would also strongly recommend looking for a motherboard with at least 2 PCIe 16x slots, as that will allow you too add many more SATA or SAS ports via a SAS card.
Hardware encoding is far from a must. It’s only really necessary if you have a lot of media in unsupported formats by the client devices. 95% of my library is h.264 in 1080p, which is supported on pretty much everything, so it will play directly and not require any transcoding. Most 1080p media is encoded in h.264, so it’s usually a non-issue. 4k media however often come in HEVC (h.265), which many devices do not support. These files will require transcoding to be playable on devices that do not support it, but a CPU can still transcode it using “software transcoding”, it’s just much slower and less responsive. So I would consider it a nice convenience, but definitely not a must, and it depends entirely on the encoding of the media library.
EDIT: Oh, I just remembered… Beware of non-standard hardware. For example motherboards from Dell and IBM/Lenovo. These often come with non-standard fan mounts and headers, which means you can’t replace the fans. They also often have non-standard power supplies, in non-standard form factors, which means that if the power supply dies, it’s nearly impossibly to replace, and when you upgrade your motherboard you are likely forced to replace the power supply as well, and since the size of the power supply isn’t standard, the new power supply will not fix in the case… Many of their motherboards also have non-standard mounts for the motherboards, which means that you are forced to replace the case when upgrading the motherboard… You can often find companies selling their old workstations for dirt-cheap, which can be a great way to get started, but often these workstations are so non-standard that you practically can’t upgrade them… Often the only standard components in these are harddrives, SSDs, optical disc drives, memory, and any installed PCIe cards.
FrederikNJS@lemm.eeto
Selfhosted@lemmy.world•What are the minimum or recommended requirements for a personal home server?English
4·2 years agoAs long as it’s capable of booting into Linux, then you can start building a homelab…
Initially I had a 2-bay Synology NAS, and a Raspberry Pi 3B… It was very modest, but enough to stream media to my TV and run a bunch of different stuff in docker containers.
In my house, computer hardware is handed down. I buy something to upgrade my desktop, and whatever falls off that machine is handed down to my wife or my daughter’s machines, then finally it’s handed down to the server.
At some point my old Core i7-920 ended up in the server. This was plenty to upgrade the server to running Kubernetes with even more stuff, and even software transcoding some media for streaming. Running BTRFS gave me the flexibility to add various used disks over time.
At some point the CPU went bad, so I bought an upgrade for my desktop, and handed my old CPU donown the can, which released an Intel Core i5-2400F for the server. At this point storage and memory started to become the main limiting factor, so I added a PCI SAS card in IT mode to add more disks.
As this point my wife needed a faster CPU, so I bought a newer used CPU for her, and her old Intel Core i7-3770 was handed down to the server. That gave quite a boost in raw CPU power.
I ended up with a spare Intel Core i5-7600 because the first motherboard I bought for my wife was dead, so I looked up and found that for very cheap I could buy a motherboard to match, so I upgraded the server which opened up proper hardware transcoding.
I have since added 2 Intel NUCs to have a highly available control plane for my cluster.
This is where my server is at right now, and it’s way beyond sufficient for the media streaming, photo library, various game servers, a lot of self-hosted smart home stuff, and all sorts of other random bits and pieces I want to run.
My suggestion would be to start out by finding the cheapest possible option, and then learn what your needs are.
What do you want your server to do? What software do you want to run? What hardware do you want to connect to it? All of this will evolve as you start using your server more and more, and you will learn what you need to buy to achieve what you want to.
FrederikNJS@lemm.eeto
Lord Of The Rings Memes@lemmy.dbzer0.com•Thin. Stretched...English
3·2 years agoThe reader I used to get the page count from, is set up to use the same font, font size, and margins for all ebooks. So the page count should be comparable between the two books.
But since you mentioned word count…
- My edition of The Hobbit has 96,923 words.
- My edition of The Fellowship of the Ring has 192,625 words.
So by word count, The Fellowship of the Ring is almost twice as long as The Hobbit.
Adding in the other books of the Lord of the Rings:
- The Two Towers: 157,065 words.
- The Return of the King: 210,618 words.
That brings the whole Lord of the Rings Trilogy to a total of 560,308 words. Meaning that the Lord of the Rings trilogy is 5.8 times longer than The Hobbit…
Looking at the extended edition run times of the movies, The Lord of the Rings trilogy runs for 10 hours and 26 minutes. The Hobbit trilogy runs for 7 hours and 52 minutes. So in movie form The Lord of the Rings in only 32% longer than The Hobbit.
So there’s 67 milliseconds of Lord of the Rings movie, per word from the books, where as there’s 292 milliseconds of The Hobbit movie, per word from the book. That’s 4.4 times as much movie runtime per word in The Hobbit, than in the Lord of the Rings… Which is quite thinly stretched…
FrederikNJS@lemm.eeto
Lord Of The Rings Memes@lemmy.dbzer0.com•Thin. Stretched...English
81·2 years agoMy ebook of The Hobbit is 217 pages. My ebook of The Fellowship of the Ring is 377 pages.
So the first book of the LOTR trilogy is 73% longer than the whole Hobbit book.
FrederikNJS@lemm.eeto
Technology@lemmy.world•US Bill proposed to jail people who download DeepseekEnglish
1·2 years agoYou are correct. And yes that is kinda the whole point of the distilled models.
FrederikNJS@lemm.eeto
Technology@lemmy.world•US Bill proposed to jail people who download DeepseekEnglish
5·2 years ago32b is still distilled. The full one is 671b.
FrederikNJS@lemm.eeto
Selfhosted@lemmy.world•What to do if your podman leaks an IP addressEnglish
1·2 years agoAgreed, Talos or k3s are great for home clusters
Yeah, it demotivated me too with the limited lives… If you still want Duolingo, I can mention that it has regional pricing, so you only need a VPN server in India to get it much much cheaper.
But it’s understandable if you don’t want to support those kinds of business practices in any way.
FrederikNJS@lemm.eeto
News@lemmy.world•Two North Korean soldiers captured alive by Ukraine for the first time, Zelensky says
7·2 years agoQuite a lot of young women jumped on the grey hair trend where I live. But of course it might not have been a trend where you live.
Here’s a bunch of examples: https://www.latest-hairstyles.com/color/silver.html
FrederikNJS@lemm.eeto
News@lemmy.world•Two North Korean soldiers captured alive by Ukraine for the first time, Zelensky says
311·2 years agoYou are aware that there were an almost global trend in 2024 of dying your hair grey, even for young women, right?
FrederikNJS@lemm.eeto
Selfhosted@lemmy.world•Anyone else here self-hosting on absolutely shit hardware?English
2·2 years agoMy home Kubernetes cluster started out on a Core i7-920 with 8 GB of memory.
Upgraded to 16 GB memory
Upgraded to a Core i5-2400S
Upgraded to a Core i7-3770
Upgraded to 32 GB memory
Recently Upgraded to a Core i5-7600K
I think I’ll stay with that for rather long…
I did however add 2 Intel NUCs (gen 6 and gen 8) to the cluster to have a distributed control plane and some distributed storage.
The depth perception also makes quite a difference. The side of your face can clearly be seen in a mirror to be the side of your face, but depending on lighting, the side of your face can look as if it’s part of the front of your face in a picture as you don’t have the depth perception. The result is that photos make you look fatter than your mirror image would.



ISO8601 is much much looser than RFC3339:
https://ijmacd.github.io/rfc3339-iso8601/